Avaya IP Agent Installation And User Manual page 185

13. Select the Test button to verify that the configuration of this screen pop works as
intended.
If you are using parameters in your screen pop, you will be presented with another
dialog box that allows you to enter Caller Name, Caller Number, Prompted Digits,
VDN, and UUI as test information. Select the Continue button when all necessary test
information has been entered in these fields.
Avaya IP Agent starts the screen pop.
14. After you have confirmed that the test of the screen pop was successful, close the
screen pop and select the Next button on the Testing window.
Avaya IP Agent displays the Setup Completed window.
15. Select the Finish button.
Avaya IP Agent saves this screen pop and displays it in the Screen Pops window.
Creating a Windows application screen pop
Issue 1.1 August 2004 185