Caller Name (%n) - Passes the name of the other party on the call, if available
●
Caller Number (%m) - Passes the telephone number of the other party on the call,
●
if available
Prompted Digits (%p) - Passes the digits the caller selected while being processed
●
through a vector, if available.
VDN (%v) - Passes the VDN name through which the call was connected
●
UUI (%u) - Passes User-to-User-Information that was collected by the Avaya
●
communication server from a centralized application.
Start Time (%s) - Passes the time when the telephone call was received by Avaya
●
IP Agent
Date (%d) - Passes the current date when the telephone call is received by Avaya
●
IP Agent
You may also specify these parameters manually within the string.
11. If you specified any parameters to be used in the Action window, you are presented
with the Format Call Information window for each parameter. In this dialog box, you
can specify the number of characters or digits used for that parameter in the screen
pop.
If you want to limit the number of characters presented for each parameter, do the
following steps:
a. Enable the check box on the specific parameter screen
b. Use the Number of characters to include and Location fields to adjust the
boundaries of the string.
c. After you have specified the boundaries of the parameter string, select the Next
button.
If more than one parameter was specified in the Action window earlier, the Format
Call Information window for the next parameter is presented. Select the Next button
when you have finished configuring each parameter.
If there are no more parameters, Avaya IP Agent displays the Testing window.
12. Select the Test button to verify that the configuration of this screen pop works as
intended.
If you are using parameters in your screen pop, you will be presented with another
dialog box that allows you to enter Caller Name, Caller Number, Prompted Digits,
VDN, and UUI as test information. Select the Continue button when all necessary test
information has been entered in these fields.
Avaya IP Agent starts the screen pop.
13. After you have confirmed that the test of the screen pop was successful, close the
screen pop and select the Next button on the Testing window.
Avaya IP Agent displays the Setup Completed window.
Creating a DDE screen pop
Issue 1.1 August 2004
189