Adjusting Intervals For Monitoring Vustats; Before You Begin; Steps - Avaya IP Agent Installation And User Manual

Using VuStats

Adjusting intervals for monitoring VuStats

When VuStats are being displayed through the VuStats Monitor, you can configure the
following time-related items:
Refresh Rate - The period of time that passes before focus is changed from the last line
●
of display in the list to the first line.
Display Interval - The period of time that passes before the VuStats Monitor changes
●
focus from one VuStats line of display to the next one in the list.

Before you begin

You should ensure that you set the VuStats Monitor time intervals so that each line of
display can be updated before the Refresh Rate changes focus to the top of the list. For
example, if you have six VuStats lines of display in the VuStats Monitor and the Display
Interval is set for 10 seconds, your Refresh Rate should be 60 seconds or greater.
Tip:
Tip:

Steps

To change the periods of time used in the VuStats Monitor window:
1. Start the VuStats Monitor.
2. Click the Refresh Rate button on the toolbar of the VuStats Monitor window.
Avaya IP Agent displays a menu with the following time intervals:
10 seconds
●
20 seconds
●
30 seconds
●
60 seconds
●
120 seconds
●
3. Select the interval that should pass before focus is changed from the last line of display
to the first line.
164 Avaya IP Agent Installation and User Guide
If a VuStats line of display has not been updated before the next VuStats
item begins to update, increase the Display Interval delay.