Avaya IP Agent Installation And User Manual page 107

15. Select the Next button.
For Road Warrior and Telecommuter configurations, Avaya IP Agent displays the next
window of the Configuration Wizard.
This window is not displayed for Avaya Telephone-DCP configurations. If you are using
the Avaya Telephone-DCP configuration, proceed to step 17.
16. Select the type of IP Endpoint configuration that will be used for this installation of
Avaya IP Agent.
If you select the Road Warrior (Voice over IP) option, you will also need to specify the
throughput available in the Bandwidth Setting field. Select the Help button for specific
information about the different bandwidth settings.
If you are using Avaya IP Agent for Windows Terminal Services, you can only select
the Telecommuter option.
! !
Important: Important:
The quality of the audio in a Road Warrior configuration is dependent on
Important:
many factors. See
information.
If you select the Telecommuter option, you must specify the telephone or extension
number that will be used to make and receive calls with Avaya IP Agent.
Note:
For Road Warrior configurations, two lights are displayed in the status bar of
Note:
the main window. These lights indicate the status of the network connection.
If these lights turn red, your network is having connectivity problems or you
have chosen a bandwidth that cannot be supported by your network
connection.
Voice-over-IP considerations
Initializing IP Endpoint configurations
on page 33 for specific
Issue 1.1 August 2004 107