Transferring Memory Contents - Icom IC-E7 Instruction Manual

6
MEMORY/CALL CHANNELS

■ Transferring memory contents

Contents of programmed memory channels can be trans-
ferred to another memory channels.
qPush and hold [V/M] (
memory write mode.
• 1 short and 1 long beeps sound.
• " " indicator and memory channel number blink.
• Do not hold [V/M] (
memory contents will be copied to VFO.
wRotate [DIAL] to select the desired memory channel to be
transferred.
eWhile pushing and holding [CALL] (
[DIAL] to select "CLEAR."
• Pushing [CALL] (
MODE
is selectable.
r Push and hold [V/M] (
• The displayed contents are cleared.
CONVENIENT!:
Instead of steps e and r operations, while pushing and
holding [FUNC], push and hold [V/M] (
sec. also clearing the contents.
tRotate [DIAL] to select the desired target memory chan-
nel.
yPush and hold [V/M] (
contents.
31
) for 1 sec. to enter select
• .
SKIP S MW
) for more than 2 sec. otherwise the
• .
SKIP S MW
•
MODE SCAN
) several times also "CLEAR" item
•
SCAN
• . ) for 1 sec.
SKIP S MW
•
SKIP S
• . ) for 1 sec. to transfer the
SKIP S MW
SCAN
), rotate
S.MW
) for 1
.
MW
• Example— Transferring
[DIAL]
the contents of memory
channel 20 to channel 30.
Steps q and w
WFMAM - DUP T SQL
VOL PRIO P SKIP MR
LOW 9
1 5
Step e
WFMAM - DUP
T SQL
SCAN
S.MW
VOL PRIO P SKIP MR
LOW 1 5 9
SET
Step r
WFMAM - DUP T SQL
VOL PRIO P SKIP MR
LOW 5 9
1
Step t
WFMAM - DUP
T SQL
VOL PRIO P SKIP MR
LOW 1 5 9
Step y
- DUP
WFMAM T SQL
VOL PRIO P SKIP MR
LOW 1 5 9
DTCS ATT
S.MW
DTCS ATT
+
SCAN SCAN
DTCS ATT
S.MW
DTCS ATT
DTCS ATT
S.MW