Memory Operation; I Memory Channel Selection; I Transferring Memory Contents - Icom IC-A24E Instruction Manual

4

MEMORY OPERATION

I Memory channel selection

The transceiver has 200 memory channels for storage of
often-used frequencies along with 6-character notes.
q Push [MR•
] to select memory mode.
MW
• Memory BANK number and memory CH number appears.
Using [DIAL]:
w Push
, then push [0•
the desired memory BANK number, then push [ENT] (or
[CLR• ]) to exit the BANK selection mode.
DEL
e Rotate [DIAL] to select the desired memory CH number.
• If no memory CH is programmed in the selected BANK, no
memory CH selection is available.
Using the Keypad:
w Push
, then push [0•
key ([0• ] to [9•
BANK
BANK number, then push [ENT] (or [CLR•
BANK-selection mode.
e Push [MR•
], then push 2 appropriate digit key (00 to
MW
19) to select the desired memory CH number.
• If no memory CH is programmed in the selected BANK, no
memory CH selection is available.
NOTE: Comments appear first when programmed, how-
ever, the transceiver can be programmed by your dealer to
show the operating frequency first. Push [MR•
play the comment in this case.
12
], and rotate [DIAL] to select
BANK
], and push appropriate digit
BANK
]) to select the desired memory
TAG
]) to exit the
DEL
MW
I Transferring memory
contents
This function transfers a memory channel's contents into the
frequency mode. This is useful when searching for signals
around a memory channel's frequency.
q Push [MR•
MW
w Select the desired memory channel to be transferred using
[DIAL] or keypad.
e Push
, then push [MR•
channel's contents into the frequency mode.
• BANK number and memory CH number disappears as fre-
quency mode is automatically selected and the memory contents
are transferred.
Memory mode
] to dis-
] to select memory mode.
] to transfer the memory
MW
Frequency mode