I Transferring Memory Contents - Icom IC-2200H Instruction Manual

5
MEMORY OPERATION

I Transferring memory contents

This function transfers a memory channel's contents to VFO
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the offset frequency, subaudible tone frequency etc.
D Memory/call➪VFO
q Select the memory/call channel to be transferred.
➥ Push [M/CALL
tate [DIAL] to select the desired memory channel.
➥ Push [M/CALL
nel.
w Push [S.MW
MW
ory/call channel contents to the VFO.
• VFO mode is selected automatically.
[EXAMPLE]: Transferring memory channel 30 contents to VFO.
Front panel operation:
( )
PRIO
Push to select memory mode.
M/CALL
MUTE
NAR
MID
LOW
LOCK ANM DUP
S ET MONI LOW
HM-133V operation:
Push to select memory mode.
27
PRIO ] to select memory mode, then ro-
PRIO ] for 1 sec. to select the call chan-
] for 1 sec. to transfer the selected mem-
Rotate
DIGITAL PRIO AO BUSY
T-SCAN PRIO SCAN
TONE M/CALL V/ MHz
MR/CALL
MW
[Y]/[Z]
for setting memory channel.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
Select memory channel.
z Select the memory/call channel to be
transferred.
➥ Push [MR/CALL] to select memory mode,
then select the desired memory channel
via [Y Y ]/[Z Z ] or keypad.
➥ Push [MR/CALL] for 1 sec. to select the
call channel.
x Push [FUNC], then [
A(MW)] for 1 sec. to
CLR
transfer the selected memory/call channel
contents to the VFO.
• VFO mode is selected automatically.
S.MW MW
Push for 1 sec.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
Push then push
PRIO SCAN
M/CALL V/ MHz
for 1 sec.