Memory Operation; Memory Channel Selection; Transferring Memory Contents - Icom IC-A24 Instruction Manual

■ Memory channel selection

The transceiver has 200 memory channels for storage of
often-used frequencies, along with 6-character notes.
q Push [MR• ] to select the memory mode.
MW
• The memory BANK number and memory CH number appears.
Using [DIAL]:
w Push , then push [0•
BANK
the desired memory BANK number. Push
[0• ] (or push [CLR•
BANK DEL
mode.
e Rotate [DIAL] to select the desired memory CH number.
• If no memory CH is programmed in the selected BANK, no
memory CH selection is available.
Using the Keypad:
w Push , and push [0•
BANK
digit key ([0• ] to [9•
BANK TAG
ory BANK number, then push
push [CLR• ]) to exit the BANK-selection mode.
DEL
e Push 2 appropriate digit key (00 to 19) to select the de-
sired memory CH number.
• If no memory CH is programmed in the selected BANK, no
memory CH selection is available.
NOTE: Comments appear first when programmed, how-
ever, the transceiver can be programmed by your dealer
to show the operating frequency first. Push [MR•
display the comment in this case.
], and rotate [DIAL] to select
and push
]) to exit the BANK selection
], then push the appropriate
]) to select the desired mem-
and push [0• ] (or
BANK
] to
MW

MEMORY OPERATION

■ Transferring memory
contents
This function transfers a memory channel's contents into the
frequency mode. This is useful when searching for signals
around a memory channel's frequency.
q Push [MR• ] to select memory mode.
MW
w Select the desired memory channel to be transferred
using [DIAL] or keypad.
e Push , then push [MR•
channel's contents into the frequency mode.
• BANK number and memory CH number disappears as fre-
quency mode is automatically selected and the memory con-
tents are transferred.
Memory mode
4
] to transfer the memory
MW
Frequency mode
3
4
12