Selecting A Memory Channel; D Selecting With The Up And Down Keys; D Selecting Using The Keypad - Icom IC-7300 HF Plus Full Manual

Previous view
9
MEMORY OPERATION
Memory channels
The transceiver has 101 memory channels. The
Memory mode enables you to quickly select often-
used frequencies.
You can temporarily tune all 101 memory channel
frequencies by rotating
MAIN DIAL
Memory
Memory channel channel
number
Regular memory
1 to 99
channels
Scan Edge
P1 and P2
memory channels

Selecting a memory channel

D Selecting with the up and down keys

1. Push to select the Memory mode.
V/M
2. Push or to select the desired memory
▲ ▼
channel.
L You can also select the memory channel with
the microphone [UP] and [DN] keys.
Memory mode
(Example: Memory channel 1)
3. To return to the VFO mode, push

D Selecting using the keypad

1. Push to select the Memory mode.
V/M
2. Touch the MHz digit on the operating frequency.
• The BAND STACKING REGISTER screen is displayed.
3. Touch [F-INP].
• The F-INP screen is displayed.
.
Capability
1 frequency and 1 mode in each memory
channel.
1 frequency and 1 mode in each memory
channel as scan edges for programmed
scans.
again.
V/M
9-2
Transfer
to VFO
Yes
Yes
4. Enter the desired memory channel number.
(Example: memory channel 2)
5. Touch [MEMO] to set the entered memory
channel.
Memory channel 2 is selected
Over-
Clear
writing
Yes Yes
Yes No