Configuring The Disk Array; Windows Nt And Windows 2000 - HP Surestore Disk Array 12h - And FC60 Service Manual
Hp surestore e disk array fc60 service manual
Hide thumbs
Also See for Surestore Disk Array 12h - And FC60:
- Service manual (746 pages) ,
- Advanced user's manual (466 pages) ,
- User manual (310 pages)
Table of Contents
Advertisement
Configuring the Disk Array
Windows NT and Windows 2000
Perform the following steps to configure the disk for operation on a Windows NT or
Windows 2000 host. Refer to the HP Storage Manager 60 User's Guide for detailed
instructions on performing each of these tasks.
1.
Add the disk array to the SM60 management topology.
2.
Set up any alert notifications.
3.
Rename the disk array.
4.
Create the desired volume structure. Replace the default 10 Mbyte volume if necessary.
5.
Add hot spares as required.
6.
Set up storage partitions if this premium feature is enabled.
7.
Set the disk array controller clocks
Configuring the Disk Array
173
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Surestore Disk Array 12h - And FC60 and is the answer not in the manual?
Questions and answers