HP Surestore Disk Array 12h - And FC60 Service Manual page 234

Table 30
Controller Status LEDs codes (cont'd)
Code Description
0xAC Load Boot Menu
0xAD Invoke Boot Menu
0xAE Exit Boot Menu
0xAF Test Diagnostics Manager
memory
0xB0 Load Diagnostics Manager
0xB1 Invoke Diagnostics Manager
0xB2 Clear work memory
0xB3 Clear extended memory
0xB4 Kernel set-up
0xB5 Enable Level 2 cache
0xB6 Load kernel
0xB7 Load network manager
0xB8 Load Application code symbol
table
0xB9 Invoke kernel
0xBE Unexpected return from kernel
0xBF Rebooting after Boot Firmware
download
0xE3 No host channel devices on the
PCI bus
0xE4 Wrong number of drive channel
devices on the PCI bus
0xE5 No RPA device on the PCI bus
Controller Enclosure Troubleshooting
234
Comments Cause / Solution
Boot Funct. Status Controller module /
reseat or replace
Memory problem /
reseat or replace
Controller module /
reseat or replace
Controller module /
reseat or replace
Memory problem
Controller module /
reseat or replace
HW Init. status