Tray ID set to unique value
Tray ID set to unique value
Tray ID set to unique value
Tray ID set to unique value
for each enclosure
for each enclosure
for each enclosure
for each enclosure
Figure 61
Split- Bus Configuration Switch Settings
Attaching SCSI Cables and Configuring the Disk Enclosure Switches
158
All segments set to "0"
All segments set to "0"
All segments set to "0"
All segments set to "0"
Tray ID set to same value
Tray ID set to same value
Tray ID set to same value
Tray ID set to same value
on both BCCs
on both BCCs
on both BCCs
on both BCCs
All segments set to "0"
All segments set to "0"
All segments set to "0"
All segments set to "0"
Note inverted orientation from upper BCC
Note inverted orientation from upper BCC
Note inverted orientation from upper BCC
Note inverted orientation from upper BCC