Bus Addressing Examples
Each disk module within the disk array is identified by its channel number and SCSI ID.
These values will differ depending on which type of configuration is used for the disk array.
See
"How are disk modules in the array identified?" on page 190
for more information.
Figure 63
is an example of split-bus addressing.
Figure 64
is an example of full-bus
addressing.
Figure 63
Split-Bus Addressing Example
Attaching SCSI Cables and Configuring the Disk Enclosure Switches
160
Need help?
Do you have a question about the Surestore Disk Array 12h - And FC60 and is the answer not in the manual?
Questions and answers