A - cover plate
B - power switch
C - cover tabs
Figure 100
Disk Enclosure Top Cover Assembly Removal and Replacement
6.
Slide the cover to the middle of the chassis. The push rod automatically engages the
internal switch (B in
7.
Insert and tighten the Torx T-10 screws along the back and side edges of the cover.
8.
Reconnect the disk enclosure.
9.
Reinstall disks and fillers.
Figure
100).
Internal Disk Enclosure Assemblies
311
Need help?
Do you have a question about the Surestore Disk Array 12h - And FC60 and is the answer not in the manual?
Questions and answers