Xp Raid Manager Command Devices; Installation Roadmap; Installing And Configuring The Disk Array; Fabric Zoning And Lun Security - HP StorageWorks XP10000 - Disk Array Configuration Manual

the SVP but they can also be set remotely using XP Remote Web Console or XP Command View
Advanced Edition Software. Refer to the applicable user's guide for procedures.
Figure 1 SNMP configuration
.

XP RAID Manager command devices

HP StorageWorks XP RAID Manager manages HP StorageWorks XP Business Copy Software or HP
StorageWorks XP Continuous Access Software operations from a host server. To use RAID Manager
you must designate at least one LDEV as a command device. This can be done with Remote Web
Console or XP Command View Advanced Edition Software. Refer to the applicable user guide for
information about how to designate a command device.
Creating scripts to configure all devices at once may save you considerable time.

Installation roadmap

Perform these actions to install and configure the disk array:
1.

Installing and configuring the disk array

Setting the host mode and host group mode
Setting the system option modes
Configuring the Fibre Channel ports
2. Installing and configuring the host
Loading the operating system and software
Installing and configuring the FCAs

Fabric zoning and LUN security

3. Connecting the disk array
Defining the paths
Verifying the host recognizes array devices
4. Configure disk devices
Writing signatures
Creating and formatting disk partitions
Verifying file system operations
Installing and configuring the disk array
The HP service representative performs these tasks:
XP Disk Array Configuration Guide for Windows 9