Servicing the Cooling System
Cooling problems include any malfunctions or obstructions that impede air flow and cause
one or more components in the controller enclosure to overheat. To avoid cooling
problems, always keep the air vents free of obstructions. Also, make sure that the ambient
air temperature is within the environmental limits.
Preserving Proper Air Flow
The controller enclosure must have proper air circulation throughout the chassis. To boost
air circulation, the chassis has air vents along its top and sides. These vents serve as air
intake and exhaust passages. See
Figure
79. Always keep vents clean and free of
obstructions.
Figure 79
Air Flow through Chassis
Controller Enclosure Troubleshooting
252
Need help?
Do you have a question about the Surestore Disk Array 12h - And FC60 and is the answer not in the manual?
Questions and answers