Table of Contents
Advertisement
SNMP Traps
SNMP Trap is the notification feature defined by SNMP protocol.
All the SNMP management applications can understand such
trap information. So you do not need to install new applications
to read the notification information.
SNMP Trap Page
Click Enable or Disable SNMP trap
SNMP Trap
functionality.
Click Apply to apply the settings.
Note: You must Save the settings
Apply
you want to maintain these settings if the
ES8508 is powered off.
SNMP Trap Server
Server IP
The SNMP trap server IP address.
Community The SNMP trap server community string.
Version
The SNMP trap version, V1 or V2c.
Add
Click the Add button to add a SNMP server.
Trap Server Profile
Server IP
The SNMP trap server IP address
Community The SNMP trap server community string.
Version
The SNMP trap version, V1 or V2c.
Click the Remove button to remove selected
Remove
SNMP server.
Click the Reload button to reload SNMP server
Reload
information.
You can see the change of the SNMP pre-defined standard traps and Comtrol pre-defined traps. The pre-
defined traps can be found in the
Note: You must Save the settings
off.
RocketLinx ES8508 Series User Guide: 2000575 Rev. A
(Page
129), if
Comtrol private
MIB.
(Page
129), if you want to maintain these settings if the ES8508 is powered
Configuration Using the Web Interface
SNMP Traps- 109
Advertisement
Table of Contents
