Table of Contents
Advertisement
Configuration Using the Web Interface
SNMP Traps
SNMP Trap is the notification feature defined by SNMP protocol. All the SNMP
management applications can understand such trap information. So you do not
need to install new applications to read the notification information.
SNMP Trap Page
SNMP Trap Click Enable or Disable SNMP trap functionality.
Click Apply to apply the settings.
Note: You must Save the settings
Apply
SNMP Trap Server
Server IP
The SNMP trap server IP address.
Community The SNMP trap server community string.
Version
The SNMP trap version, V1 or V2c.
Add
Click the Add button to add a SNMP server.
Trap Server Profile
Server IP
The SNMP trap server IP address
Community The SNMP trap server community string.
Version
The SNMP trap version, V1 or V2c.
Remove
Click Remove to remove selected SNMP server.
Click the Reload button to reload SNMP server
Reload
information.
You can see the change of the SNMP predefined standard traps and Comtrol pre-defined traps. The pre-
defined traps can be found on the
Note: You must Save the settings
powered off.
106 - SNMP Traps
you want to maintain these settings if the
ES8509-XT is powered off.
Comtrol ftp
site.
(Page
127), if you want to maintain these settings if the ES8509-XT is
(Page
127), if
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
Advertisement
Table of Contents
