Alarms (Snmp); Introduction - Nortel CC MIS Getting Started Manual

Release 5.2

Alarms (SNMP)

Introduction

Note: The Alarms option is displayed only if the SNMP feature is enabled
and you have supervisor access privileges to this feature. Due to the techni-
cal nature of the SNMP feature, a background in network management and
the SNMP protocol is recommended for administrators and users of this
feature. For additional information concerning this feature, refer to the CC
MIS Online Help.
The Alarms Definition window is the starting point for all SNMP-related ac-
tivities at the partition level, including:
From this window, you can setup up to 100 custom statistics to be monitored
for each ACD group in the partition. The setup of each statistic includes
threshold and alarm information. The information defined for each Alarm
Definition is what is provided to a Network Management System (NMS)
when it queries for the CC MIS Partition MIB entries.
Use the steps below to access the Alarm Definition window.
steps
Accessing the Alarms definition screen
CC MIS Getting Started Guide (297-2671-175)
• alarm definition and maintenance,
• SNMP community setup and maintenance, and
• SNMP MIB file transfer
1. From the CC MIS Main window, select Displays /
Alarms option.
2. The Alarms Definition window is displayed.
CC MIS
CC MIS
Alarms (SNMP)
8
8
Page 8-1