Configuring Alarms - Nortel TDM Recorder User Manual

Configuring Level 1 Components

Configuring alarms

All alarms that can be triggered in Nortel TDM Recorder are built into the
application when it ships. System Administrators configure alarms to
specify whether or not the alarm is to be audible, how long to keep the alarm
in history, and who is to be notified when the alarm is triggered. For the
latter activity, you configure email servers to facilitate the alarm
notifications. These tasks are described in detail in the Nortel TDM
Recorder System Administration Guide.
To configure alarms, log in to the Recorder Manager and choose Alarms
then choose either View Alarms, Notification Profiles, and Alarm
Settings, as described in the following table:
Alarm Tab Description
View
Alarms
Notification
Profiles
100
Allows you to view all active alarms
currently triggered as well as alarm
history, turn off any warning sounds, set a
Refresh Rate for the system to poll
components to determine if alarm
conditions exist, and to view individual
alarms by double-clicking.
Allows you to view profiles of all persons
who will be notified when an alarm is
triggered, as well as Create, Edit, and
Delete alarm profiles.
Standard 3.0
Section of
System
Administration
Guide
Viewing Active
Alarms
Reviewing Alarm
Notification
Profiles
Nortel TDM Recorder