Feature Descriptions; Network Name Display - Nortel ICS Install Manual

Transmission of B-channel packet data is not supported by
Modular ICS.
Contact your ISDN service provider for more information
about these services and features. Packages for ISDN service
in North America are described on page 74.
The terminal equipment (TE) connected to the Norstar system
can use some feature codes supported by the ISDN service
provider. Refer to ISDN services and features in the Modular
ICS 7.1 System Coordinator Guide for more information.

Feature descriptions

The following section provides brief descriptions about the
ISDN features, and links for more programming information.

Network name display

This feature allows ISDN to deliver the Name information of
the users to those who are involved in a call that is on a public
or private network. For information about system
programming for this feature see, BusName on page 467.
Systems with Advanced Private Networking connections
(MCDN SL-1) to a Meridian system also retain information
about sets that have forwarded or transferred a call, as well as
the originating caller information.This feature is called
Network Call Redirection Information (NCRI). This
information is available to all parties involved in the call.
Calls can only be redirected for a defined number of times
within the network. This is currently hardcoded to five times.
Once this limit is reached, call redirection will be disallowed
for any type of outgoing line being presented for redirection.
N0130943 02
Welcome to ISDN / 59
Modular ICS 7.1 Installer Guide