Setting Up A New Cc Mis System (Overview); Table 3-1: Functions Requiring Cc Mis To Be Shut Down - Nortel CC MIS User Manual

CC MIS
3-4

Table 3-1: Functions requiring CC MIS to be shut down

Function
Test all the input/output ports
automatically
Load new software version
Change CC MIS Network Name in Sys-
tem Configuration screen
The Maintenance and Administration system takes into account the
state of CC MIS, and alters its menus accordingly. For example, the
File Transfer option on the Diagnostics menu is only available when
logged in through the dial-up modem port.

Setting up a new CC MIS system (overview)

To setup a new system proceed through the menus to access the Con-
figuration menu. After the system has been installed and a successful
login is achieved, select the Configuration option from the Mainte-
nance and Administration Main menu. This causes the Configuration
menu to be displayed. After the Configuration menu is displayed, pro-
ceed as follows:
Non-network
1. Configure the system - (Refer to Chapter 6)
2. Configure the switch links - (Refer to Chapter 6)
3. Configure partitions (local) - (Refer to Chapter 7)
4. Allocate disks - (Refer to Chapter 7)
5. (Optional) Define custom intervals - (Refer to Chapter 7)
Network
1. Configure the system - (Refer to Chapter 6 & 8)
2. Configure the switch links - (Refer to Chapter 8)
3. Configure physical network - (Refer to Chapter 8)
4. Configure partitions -(local in Chapter 7 and NAPs in Chapter 8)
5. Configure virtual network - (Refer to Chapter 8)
6. (Optional) Define custom intervals - (Refer to Chapter 7)
Release 5.2
Manual Automatic
shutdown shutdown
X
X
X
297-2671-545