Table of Contents
Advertisement
7.
Enter global values for the following options:
Table 32. BGP global options
Option
Preference
Metric
Cluster ID
8.
Click OK.
Configuring a New BGP Peer Group
You can configure a BGP peer group for the SSR.
To configure a BGP peer group:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object.
5.
Double-click the BGP Routing object.
6.
Double-click the BGP Groups object and click the Create New BGP Peer Group object.
CoreWatch User's Manual
Defines the preference value for BGP hosts/networks. You can
specify a value between 0 and 255, inclusive.
Defines the default-metric value for BGP hosts/networks. You
can specify a value between 0 and 65535, inclusive.
Specifies the IP address for BGP hosts/networks.
Chapter 15: Configuring BGP on the SSR
Description
271
Advertisement
Table of Contents
