Table of Contents
Advertisement
discussions on modifying the different types of VLANs and changing which ports are
included in a VLAN follow.
Changing a Port-Based VLAN's Name or ID
To change the name of a port-based VLAN:
1.
Start Configuration Expert if you have not already done so.
Note:
2.
Open the configuration file you want to modify and then double-click that file's
Bridging Configuration object.
3.
Double-click the VLAN Configuration object.
4.
Double-click the Port-Based VLANs object. From the list of VLANs that appears, click
the VLAN you want to modify.
A VLAN Definition dialog box similar to the following appears:
5.
Enter the new VLAN name or VLAN ID in the appropriate text boxes.
6.
Click OK.
CoreWatch User's Manual
If you start Configuration Expert from the Schematic view choosing the
Configure VLAN command, Configuration Expert automatically expands
the Active Configuration file's tree to the VLAN Configuration object. If you
are adding a VLAN to the Active Configuration file, go to
Figure 48. VLAN Definition dialog box (port-based)
Chapter 7: Configuring VLANs on the SSR
step
3.
101
Advertisement
Table of Contents
