Table of Contents
Advertisement
4.
If you wish to limit the range of your search to encompass only the immediate
subtree, turn on the Search only subtree option.
5.
Click the Find Next button. Configuration Expert searches the current configuration
file (or the specified portion of it) for the text string you entered in
Deleting Objects
You can delete any object you add except for VLANs. To delete an object:
1.
Select the object you want to delete.
2.
Select the File menu and choose Delete Selection.
3.
Click OK when Configuration Expert prompts you to verify whether you want to
delete the object.
Order of Configuration Tasks
Perform configuration tasks in the following order:
1.
Provide system information (such as the SSR's name and location), define the SSR's
ports, set up the SSR for a SYSLOG server and Domain Naming System (DNS)
servers, and configure the SSR for SNMP traps. For details on performing these tasks,
see
Chapter 5: "Changing System Settings" on page
2.
Configure bridging on the SSR as discussed in
on page
3.
Group physical ports on the SSR by configuring VLANs as discussed in
"Configuring VLANs on the SSR" on page
4.
If you are using the SSR in an IP environment, create IP interfaces and then configure
those interfaces for unicast or multicast routing.
For details on IP interfaces, see
page
107. For details on unicast routing, see
on the SSR" on page
Multicast Routing on the SSR" on page
5.
If you are using the SSR in an IPX environment, configure IPX interfaces as discussed
in
Chapter 11: "Configuring the SSR for IPX Routes" on page
6.
If you want to control traffic on the SSR, configure the SSR's QoS policies as discussed
in
Chapter 12: "Configuring QoS on the SSR" on page
7.
If you want to set security on the SSR, define ACLs and Layer-2 security filters as
discussed in
8.
If you want to set OSPF on the SSR, configure the SSR's OSPF behavior as discussed in
Chapter 14: "Configuring OSPF on the SSR" on page
CoreWatch User's Manual
65.
131. For details on multicast routing, see
Chapter 13: "Configuring Security on the SSR" on page
Chapter 4: Learning Configuration Expert Basics
49.
Chapter 6: "Configuring SSR Bridging"
87.
Chapter 8: "Configuring IP Interfaces for the SSR" on
Chapter 9: "Configuring Unicast Routing
147.
247.
step
2.
Chapter 7:
Chapter 10: "Configuring
159.
179.
207.
45
Advertisement
Table of Contents
