Table of Contents
Advertisement
Modifying an Existing VRRP Router
To modify an existing virtual router on the SSR:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the VRRP Configuration object.
5.
Double-click the VRRP Router Configuration object, then select the existing VRRP
interface you wish to modify.
The VRRP Router dialog box appears:
6.
Specify a router identification number in the Virtual Router ID box. You must specify
a router identification number in order to complete VRRP modification.
Note:
7.
If you wish, under Associate IP Address with Virtual Router, specify the IP address and
subnet mask of the associated router in the appropriate text boxes.
8.
Click the Advanced tab:
CoreWatch User's Manual
Figure 73. VRRP Router dialog box (Definition tab)
The identification you enter must consist of digits only. No other characters
are allowed in the identification name.
Chapter 8: Configuring IP Interfaces for the SSR
129
Advertisement
Table of Contents
