Chapter 13: Configuring Security on the SSR
Setting IP Security
You can set security on an IP network by configuring ACLs that you will apply to IP
interfaces. To set security:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Security Configuration object.
3.
Double-click the IP Security object.
4.
Click the Configure New IP Security Profile object.
Configuration Expert opens the IP Security wizard.
5.
Click Next.
Configuration Expert prompts you for the ACL's name. You can use a string of
characters or a number.
208
Figure 129. IP Security wizard
CoreWatch User's Manual