Table of Contents
Advertisement
Chapter 16: Configuring Routing Policies on the SSR
11. Specify whether the SSR restricts the export or associates a metric with the exported
route by doing one of the following:
–
If you do not want the SSR to export any routes from the source, select the Restrict
export to the specified BGP source option.
–
If you want the SSR to associate a metric with the exported route, select a metric
from the Route Metric drop-down list. Select Inherited if you want the route to use
the policy's default metric. Otherwise, select a number from 1 to 16.
12. Click OK.
13. Repeat
to include in your export policies.
Configuring and Modifying Autonomous System Path Export Sources
An autonomous system path export source building block specifies a source for exporting
AS path routes into other protocols.
To define AS path export source building blocks:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object.
5.
Double-click the Routing Policy Configuration object.
6.
Double-click the Building Blocks object.
7.
Double-click the Export Source object.
8.
Double-click the Autonomous System Path object, and then do one of the following:
–
If you are creating a new export source, click the Configure New AS Export Source
object.
–
If you are modifying an existing export source, select that export source.
314
step 9
through
step 12
until you create all of the BGP export sources you plan
CoreWatch User's Manual
Advertisement
Table of Contents
