Table of Contents
Advertisement
Table 31. Virtual link options (Continued)
LSA Retransmission
Interval
Transit Delay
Hello Interval
Router Dead Interval
h. To add another link, select the Add More Link check box, click Next, and then
continue repeating
neighbors.
17. Click Finish.
Modifying Area Tables
To modify existing area tables:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object and then double-click the OSPF Area Table
object.
5.
Double-click the area table you want to modify.
Configuration Expert lists the objects of the table you are modifying.
6.
Double-click the type of object (Networks Interfaces, and so on) you want to modify.
Click the object you want to modify.
7.
Edit the object's dialog box.
CoreWatch User's Manual
Option
Enter the number of seconds between link-state
advertisement retransmissions for adjacencies belonging
to the virtual link. Specify a number equal to or greater
than 1.
Enter the estimated number of seconds required to
transmit a link-state update over the virtual link.
Transit delay takes into account transmission and
propagation delays and must be greater than 0. Specify a
number equal to or greater than 1.
Enter a number from 0 to 255 to specify the estimated
number of seconds between hello packets that the router
sends on the virtual link.
Enter a number from 0 to 255 to specify the number of
seconds that may occur without Hello packets being
heard before the router's neighbors will declare it down.
step a
Chapter 14: Configuring OSPF on the SSR
Description
through
step g
until you add all the appropriate
267
Advertisement
Table of Contents
