Configuring And Modifying Ospf Export Destinations - Cabletron Systems SSR-GLX19-02 User Manual

Configuring and Modifying OSPF Export Destinations

An OSPF export destination building block specifies an export destination for OSPF
routes.
Note:
You can export OSPF routes only into OSPF ASE routes.
To define OSPF export destination building blocks:
1. Start Configuration Expert if you have not already done so.
2. Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3. Double-click the IP Routing Configuration object.
4. Double-click the IP Unicast Routing object.
5. Double-click the Routing Policy Configuration object.
6. Double-click the Building Blocks object.
7. Double-click the Export Destination object.
8. Double-click the OSPF object, and then do one of the following:
– If you are creating a new export destination, click the Configure New OSPF Export
Destination object.
– If you are modifying an existing export destination, select that export destination.
An OSPF Export Destination dialog box similar to the following appears:
CoreWatch User's Manual
Chapter 16: Configuring Routing Policies on the SSR
Figure 197. OSPF Export Destination dialog box
303