Table of Contents
Advertisement
Note:
18. Specify whether or not you wish to restrict redistribution of routes that match your
defined filter by turning the Restrict redistribution of routes matching the filter option on
or off, accordingly.
19. If you wish, you can specify a route metric for the filter network by entering any
numerical value in the Route Metric box.
20. If you wish to specify additional filter networks, be sure to activate the Add more filters
option, click Next, and repeat
Modifying Export Policies
You can modify export policies to change the filter and/or network specifications for one
or more export sources associated to a particular export destination.
To modify an existing export policy:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object.
5.
Double-click the Routing Policy Configuration object.
6.
Double-click the Export Policies object.
7.
Double-click the name of the existing export policy you wish to modify.
Once the list of existing export sources for this policy is displayed, double-click the
export source object you wish to modify.
8.
Do one of the following:
–
Double-click the Filters object and then select the name of the export source filter
you wish to modify.
–
Double-click the Network Specification object and then select the name of the
export source network you wish to modify.
9.
Modify the attributes of the export source filter and/or network by editing the fields
of the Export Policy Filter dialog box or Filter Network Specification dialog box that
appears.
These dialog boxes include some of the same fields you specified when configuring the
export policy. For more information on these fields, see
CoreWatch User's Manual
If you select the Match Length Between <number> and <number> option,
you must specify values defining the acceptable range to justify a match
to your network mask. You can specify values between 0 and 32 for the
acceptable length.
step 16
Chapter 16: Configuring Routing Policies on the SSR
through
step
19. Otherwise, click Finish.
"Export Policies" on page
335.
341
Advertisement
Table of Contents
