Chapter 16: Configuring Routing Policies on the SSR
Aggregate Destination Building Blocks
Define an aggregate destination to create or modify an aggregate generation destination
and control the export of routes from a source with routes to directly attached interfaces.
The procedure for defining an aggregate destination depends on whether you are creating
a new destination or modifying an existing one. Separate discussions on these tasks
follow.
Configuring Aggregate Destinations
To create aggregate destination building blocks:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object.
5.
Double-click the Routing Policy Configuration object.
6.
Double-click the Building Blocks object.
7.
Double-click the Aggregate Destinations object and click the Configure New
Aggregate Destination object.
Configuration Expert opens the Aggregate Destination wizard.
8.
Click Next.
306
CoreWatch User's Manual