Table of Contents
Advertisement
Table 57. IPX Interface table fields (Continued)
Field
Uncompressed Tx
Compressed Rx
Compressed Init Rx
Compressed Rejected
Rx
Uncompressed Rx
Media Type
IPX Network number
No of State Changes
Initialization failed
times
Delay (mS)
Throughput
Neighbor Name
Neighbor Network
Number
Obtaining IPX Forwarding Information
Obtain IPX Forwarding information to display details about the routes of an SSR's IPX
interfaces. To access such information, do one of the following:
•
In the Front Panel view, select the Monitor menu, choose Routing State, choose IPX
State, and then choose IPX Forwarding Table.
•
In the Schematic view, double-click the IPX Router function.
CoreWatch User's Manual
Chapter 20: Checking the Status of Routing Tables
Indicates how many packets were sent without being
compressed even though compression was turned on for the
interface.
Indicates how many compressed packets were received.
Indicates how many compression initialization packets were
received.
Indicates how many compressed packets received on the
interface were rejected.
Indicates how many packets were received without being
compressed even though data compression was enabled on
the interface.
Indicates that the interface is for an Ethernet network
Identifies the IPX network number of the interface.
Indicates how many times the interface has changed state.
Indicates how many times the interface failed to start.
Indicates how many milliseconds it takes to transmit one byte
of data (excluding protocol headers) to a destination on the
other end of the interface if there is no other traffic on that
interface.
Indicates how much data (in bits per second) may flow
through the interface if there is no other traffic on that
interface.
Identifies the name of the neighboring router located on a
WAN.
Identifies the internal network number of the neighboring
router located on a WAN.
Description
403
Advertisement
Table of Contents
