9.
Specify the name you wish to assign to the direct export source in the Destination
Name box.
10. Select the interface associated with the direct routes from the Interface
Name/Address drop-down list.
11. Specify whether the SSR restricts the export or associates a metric with the exported
routes by doing one of the following:
–
If you do not want the SSR to export any routes from the source, select the Restrict
export from the specified Direct Source option.
–
If you want the SSR to associate a metric with the exported routes, select a metric
from the Route Metric drop-down list. Select Inherited if you want the route to use
the policy's default metric. Otherwise, select a number from 1 to 16.
12. Click OK.
13. Repeat
want to include in your export policies.
Configuring and Modifying Static Export Sources
A static export source building block specifies a source for exporting static routes into
other protocols.
To define static export source building blocks that can be used for either RIP or OSPF:
CoreWatch User's Manual
Figure 206. Direct Export Source dialog box
step 9
through
step 12
Chapter 16: Configuring Routing Policies on the SSR
until you create all the direct export sources you will
319