Table of Contents
Advertisement
Defining SmartTRUNK Settings for SSR Bridging
To set up the SSR to perform SmartTRUNKing:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Bridging Configuration object.
3.
Double-click the SmartTRUNKing Configuration object.
4.
Click the Configure New SmartTRUNKing Port object.
Configuration Expert opens the ARP wizard:
5.
Click Next.
The SmartTRUNKing Name Entry panel appears:
6.
Define the port(s) to be included in the SmartTRUNK by taking the following steps:
a.
In the SmartTRUNKing Port box, enter a name for the port you wish to assign to
the SmartTRUNK.
The SmartTRUNKing port name is a string up to 32 characters long. You cannot
begin a SmartTRUNKing port name with an underscore ( _ ) or the prefix "SYS_.'
b. Specify the Load Policy by selecting either the Least Loaded or Round Robin option.
c.
Under Options, select either Protocol or Timeout. If you select the Protocol option,
CoreWatch User's Manual
Figure 34. SmartTRUNKing Name Entry panel
Chapter 6: Configuring SSR Bridging
83
Advertisement
Table of Contents
