Adding or Deleting a Flow's Interfaces through a Dialog Box
To use a dialog box to add an interface to a flow's list of interfaces or delete one from the
list:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and double-click the QoS
Configuration object.
3.
Do one of the following:
–
If you are modifying an IP flow's interface list, double-click the IP QoS Profiles
object.
–
If you are modifying an IPX flow's interface list, double-click the IPX QoS Profiles
object.
4.
From the list of flows that appears, double-click the flow associated with the interface
list you want to change.
5.
Click the flow's Input Interface List object.
A Policy Input Interface List dialog box similar to the following appears:
6.
Specify which interface's you want the flow to apply to by adding and removing
interfaces in the flow's interface list.
–
To add interfaces, select them in the Available Interfaces list and click the Add
button.
CoreWatch User's Manual
Figure 127. Policy Input Interface List dialog box
Chapter 12: Configuring QoS on the SSR
203