Table of Contents
Advertisement
–
–
Note:
13. If you wish to specify additional filter networks, be sure to activate the Add more filters
option, click Next, and repeat
Modifying IP Route Filters
Modify an IP route filter if you want to change its name, set different filter options, or add
another network to the filter.
To modify IP route filters:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object.
5.
Double-click the Routing Policy Configuration object.
6.
Double-click the Building Blocks object.
7.
Double-click the Filters object and then do one of the following:
–
If you want to change the name of the filter, select the filter you wish to change
from the list of filters displayed in the Configuration Expert configuration tree.
–
If you want to change the filter settings of a network or host, select that network or
host from those listed for the filter you are modifying. In the Filter Network
Specification dialog box that appears, define the filter's settings.
–
If you want to add a new network or host to the filter, select the Add New Network
object. In the Filter Network Specification dialog box that appears, define the
filter's settings.
For details on the fields of the Filter Network Specification dialog box that
appears when you are changing filter settings or adding a new network or host to
the filter, see
8.
After making all your changes to the filter, click OK.
CoreWatch User's Manual
More Specific than Supplied Mask
Match Length Between <number> and <number>
If you select the Match Length Between <number> and <number> option,
you must specify values defining the acceptable range to justify a match
to your network mask. You can specify values between 0 and 32 for the
acceptable length.
step 11
"Configuring IP Route Filters" on page
Chapter 16: Configuring Routing Policies on the SSR
and
step
12. Otherwise, click Finish.
331.
333
Advertisement
Table of Contents
