Configuring and Modifying BGP Import Sources
To define BGP import source building blocks:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object.
5.
Double-click the Routing Policy Configuration object.
6.
Double-click the Building Blocks object.
7.
Double-click the Import Source object, click the BGP object, and then do one of the
following:
–
If you are creating a new BGP import source, click the Configure New BGP Import
Source object.
–
If you are modifying an existing BGP import source, select that source from the list
of BGP import sources Configuration Expert displays.
A BGP Import Source dialog box similar to the following appears:
8.
Specify a name four your BGP import source in the Source Name box.
CoreWatch User's Manual
Figure 211. BGP Import Source Definition dialog box
Chapter 16: Configuring Routing Policies on the SSR
327