Table of Contents
Advertisement
USER'S GUIDE
To begin configuring SNMP Management Groups:
From the menu bar click on Functions then click on SNMP, or click
on Add. The following screen will then be displayed:
Use this resulting screen and the following sections to complete the SNMP Management Group
configuration.
C
SNMP M
ONFIGURING
1.
Using the above Properties window, enter a user-defined Group Name for the SNMP
Management Group you are configuring.
2.
Click on Add.
C
SNMP M
ONFIGURING
SNMP Community Names identify the community to which an SNMP Manager, along with the
Agent(s) that it manages, belongs. It is used to authenticate an SNMP PDU. "public" is a widely
used Community Name. These SNMP Communities are supported by devices at the sites included
in this SNMP Management Group. To configure Communities:
1.
Click on the Communities tab.
2.
Click on Add.
3.
Enter a user-defined Community Name. This name will be associated with a defined MIB Access
Level.
144
SFVRA Configuration Manager
G
ANAGEMENT
ROUP
G
ANAGEMENT
ROUP
on the toolbar. Then click
P
ROPERTIES
C
OMMUNITIES
Advertisement
Table of Contents
