Chapter 17: Checking System Status
Obtaining Trap Information
Obtain trap information if you want to know what traps are currently configured for the
SSR, to which community they are associated, and to which IP address(es) they will be
sent. To access such information:
1.
If you are not currently in the Front Panel view, switch to it by clicking the CoreWatch
main window.
2.
Select the Monitor menu, choose System State, and then choose Trap Table.
A Trap table similar to the following appears:
The following table describes the fields of the Trap table's upper frame. For details on
using the Table toolbar, see
Table 41. Trap table fields
Field
Trap Index
Community Name
Status
IP Address
368
Figure 235. Trap table
Appendix A: "Working with Tables" on page
Displays all of the currently configured traps for the SSR. This
identifier is simply a number between 1 and 32.
SNMP with string sent to management for purpose of query.
Displays the current state of the trap, either "enabled" or
"disabled". When a trap is disabled, no trap is sent to the
associated IP address.
Displays the IP address to which the destination trap will be
sent.
Description
CoreWatch User's Manual
443.