Table of Contents
Advertisement
Routing State Submenu
If you select the Monitor menu and then choose Routing State, the Routing State submenu
appears. That submenu provides access to the additional submenus listed in the following
table. The table describes the commands available on these additional submenus.
Table 81. Routing State submenu commands
Submenu
IP State
IPX State
OSPF State
RIP State
CoreWatch User's Manual
Command
IP Interface Table
IP Forwarding Table
IPX Interface Table
IPX Forwarding Table
OSPF Interface Table
OSPF Area Table
OSPF Neighbor Table
OSPF Link State DB Table
OSPF Area Aggregate
Table
RIP Interface Table
Appendix B: CoreWatch Menus
Description
Displays information about which port
each IP interface uses and provides
address information about those
interfaces.
Displays information about the routes
used by the IP interfaces on an SSR
Displays information about packets sent
from an SSR's IPX interfaces, and
indicates which WAN router each of those
interfaces may use.
Displays information about the routes
used by the IPX interfaces on an SSR.
Displays information about the routes,
status, authentication, and other details
about each OSPF interface on an SSR
Displays information about the different
areas defined for an OSPF autonomous
system.
Displays information about the
neighboring routers of an SSR.
Displays information about the link-state
advertisements of the areas to which the
SSR is attached.
Displays information about the IP
addresses and TOS that are used by OSPF
to determine the destination of packets.
Displays information about how many
packets on a RIP interface the SSR
discarded, how many route entries of
valid RIP packets the SSR ignored, how
many RIP updates the SSR has sent on the
interface, and whether a RIP interface is
functioning.
451
Advertisement
Table of Contents
