Table of Contents
Advertisement
To load a configuration file into the SSR:
1.
Select the File menu and choose Apply Config. An Apply Configuration dialog box
similar to the following appears:
2.
Do one of the following:
–
If you are already in the appropriate directory, enter the name of the configuration
file you wish to apply to the SSR in the Configuration file box.
–
Choose the Browse button, navigate to the directory containing the configuration
file you wish to apply to the SSR, and select it.
3.
Enter the IP address and community string for the SSR in the Switch Name/IP box
and Community String boxes, respectively.
4.
Choose the Apply Config button. Configuration Expert loads the specified
configuration file into the SSR as both the Startup and Active configuration files.
Retrieving a Configuration File from an SSR
Just as you can load configuration files into an SSR, you can retrieve the active
configuration file from an SSR, as well.
To retrieve a configuration file from an SSR:
1.
Select the File menu and choose Retrieve Config. A Retrieve Configuration dialog
box similar to the following appears:
CoreWatch User's Manual
Figure 12. Apply Configuration dialog box
Chapter 4: Learning Configuration Expert Basics
47
Advertisement
Table of Contents
