Table of Contents
Advertisement
SSR's import routing policies to control which routes are added to the SSR's routing table
and to specify the SSR's preference of routes from one protocol or peer over another.
The method you use to create import source building blocks depends on whether you are
defining one for RIP, OSPF, or BGP. Separate discussions on creating import source
building blocks for the different protocols follow.
Configuring and Modifying RIP Import Sources
To define RIP import source building blocks:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object.
5.
Double-click the Routing Policy Configuration object.
6.
Double-click the Building Blocks object.
7.
Double-click the Import Source object.
8.
Double-click the RIP object, and then do one of the following:
–
If you are creating a new import source, click the Configure New RIP Import
Source object.
–
If you are modifying an existing import source, select that import source.
CoreWatch User's Manual
Chapter 16: Configuring Routing Policies on the SSR
323
Advertisement
Table of Contents
