Table of Contents
Advertisement
select that field and then click the Up and Down buttons until the field is listed next to
the desired precedence value.
You may assign a precedence value from 1 to 7, where 1 is the highest precedence
value. The default precedences of the fields are Destination Port (1), Destination IP
Address (2), Source Port (3), Source IP Address (4), TOS (5), Interface (6), Protocol (7).
7.
Click OK.
Assigning IPX QoS Precedence
You can set the QoS precedence for the following flow fields in IPX traffic:
•
Destination network
•
Source network
•
Destination node
•
Source node
•
Destination port
•
Source port
•
Incoming interface
To assign the IPX QoS precedence:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's QoS
Configuration object.
3.
Double-click the Global Settings object.
4.
Double-click the QoS Precedence object.
5.
Click the IPX QoS Precedence object.
An IPX QoS Precedence dialog box similar to the following appears:
CoreWatch User's Manual
Chapter 12: Configuring QoS on the SSR
183
Advertisement
Table of Contents
