Table of Contents
Advertisement
11. Specify whether the SSR restricts the export or associates a metric with the exported
routes by doing one of the following:
–
If you do not want the SSR to export any routes from the source, select the Restrict
export from the specified Static Source option.
–
If you want the SSR to associate a metric with the exported routes, select a metric
from the Route Metric drop-down list. Select Inherited if you want the route to use
the policy's default metric. Otherwise, select a number from 1 to 16.
12. Click OK.
13. Repeat
want to include in your export policies.
Configuring and Modifying Aggregate Export Sources
An aggregate export source allows you to export multiple routes over various protocols
while simultaneously associating an identifier with the routes.
Note:
In order to define an aggregate export source building block, you must have
previously configured at least one aggregate destination building block, as
described in
To define aggregate destination building blocks:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object.
5.
Double-click the Routing Policy Configuration object.
6.
Double-click the Building Blocks object.
7.
Double-click the Export Source object.
8.
Double-click the Aggregates object, and then do one of the following:
–
If you are creating a new export source, click the Configure New Aggregate Export
Source object.
–
If you are modifying an existing export source, select that export source.
CoreWatch User's Manual
step 9
through
step 12
"Aggregate Destination Building Blocks" on page
Chapter 16: Configuring Routing Policies on the SSR
until you create all the static export sources you will
306.
321
Advertisement
Table of Contents
