Table of Contents
Advertisement
11. Click OK.
12. Repeat
include in your export policies.
Configuring and Modifying OSPF Export Sources
An OSPF export source building block specifies a source for exporting OSPF routes into
other protocols.
To define OSPF export source building blocks:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object.
5.
Double-click the Routing Policy Configuration object.
6.
Double-click the Building Blocks object.
7.
Double-click the Export Source object.
8.
Double-click the OSPF object, and then do one of the following:
–
If you are creating a new export source, click the Configure New OSPF Export
Source object.
–
If you are modifying an existing export source, select that export source.
CoreWatch User's Manual
step 8
through
step 11
Chapter 16: Configuring Routing Policies on the SSR
until you create all of the RIP export sources you plan to
311
Advertisement
Table of Contents
