Table of Contents
Advertisement
Specifying VRRP Trace Options
To specify VRRP Trace options:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the VRRP Configuration object.
5.
Click the VRRP Trace Options object.
The VRRP Trace Options dialog box appears:
6.
Select or deselect one or more of the four Trace options:
–
Display a message if VRRP receives any event
–
Display a message when Virtual Router changes state
–
Display a message when error packet is received
–
Enable all VRRP tracing
Note:
7.
Click OK.
CoreWatch User's Manual
Figure 68. VRRP Trace Options dialog box
Selecting the fourth option, Enable all VRRP tracing, automatically turns on
the other three options.
Chapter 8: Configuring IP Interfaces for the SSR
125
Advertisement
Table of Contents
