Table of Contents
Advertisement
Chapter 8: Configuring IP Interfaces for the SSR
9.
If you wish, specify the following options on the Advanced tab of the VRRP Router
dialog box:
a.
Specify values in the Priority and Advertise Interval boxes. You can specify a
number between 1 and 254, inclusive, for the priority, and a number between 1
and 255, inclusive, for the advertise interval.
b. Select an authorization type from the Authorization Type drop-down list.
c.
Specify an authorization key in the Authorization Key box. You can specify a key
string up to eight characters in length.
d. Specify whether you want to disable preempt mode by turning the Disable
Preempt Mode option on or off.
e.
Specify Start or Stop to activate or deactivate VRRP on the SSR.
10. Click OK.
What to Do Next
After you define your IP interfaces, you need to configure your SSR for unicast or
multicast routing. For details on unicast routing, see
Routing on the SSR" on page
"Configuring Multicast Routing on the SSR" on page
130
Figure 74. VRRP Router dialog box (Advanced tab)
131. For details on multicast routing, see
Chapter 9: "Configuring Unicast
Chapter 10:
147.
CoreWatch User's Manual
Advertisement
Table of Contents
