Table of Contents
Advertisement
Chapter 16: Configuring Routing Policies on the SSR
c.
Specify the origin for your AS export source by selecting the appropriate type
from the Origin drop-down list. You can select one of the following four options:
–
–
–
–
11. Specify whether the SSR restricts the AS path export or associates a metric with the
exported route by doing one of the following:
–
If you do not want the SSR to export any routes from the source, select the Restrict
export to the specified AS Path source option.
–
If you want the SSR to associate a metric with the exported route, select a metric
from the Route Metric drop-down list. Select Inherited if you want the route to use
the policy's default metric. Otherwise, select a number from 1 to 16.
12. Click OK.
13. Repeat
plan to include in your export policies.
Configuring and Modifying Tag Export Sources
A tag export source building block specifies a source for exporting routes associated with
a particular tag type into other protocols.
To define tag export source building blocks:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object.
5.
Double-click the Routing Policy Configuration object.
6.
Double-click the Building Blocks object.
7.
Double-click the Export Source object.
8.
Double-click the Tag object, and then do one of the following:
–
If you are creating a new export source, click the Configure New Tag Export Source
object.
–
If you are modifying an existing export source, select that export source.
316
any
igp
egp
incomplete
step 9
through
step 12
until you create all of the AS Path export sources you
CoreWatch User's Manual
Advertisement
Table of Contents
