Table of Contents
Advertisement
Chapter 10: Configuring Multicast Routing on the SSR
7.
Specify whether you want to enable or disable IGMP on the interface by selecting the
appropriate options.
8.
Click OK.
9.
Repeat
your network environment.
Configuration Expert adds the interfaces on which IGMP is enabled to the list of
interfaces found in the IGMP Enabled Interface object. Configuration Expert adds the
interfaces on which IGMP is disabled to the list of interfaces found in the IGMP
Disabled Interface object.
What to Do Next
As discussed in the following list, what you do after configuring IP interfaces for
multicast routing depends on your network environment and whether you want to
control traffic or set security.
•
If your network environment includes IPX, see
IPX Routes" on page
•
If you do not need to configure the SSR for IPX, you can control traffic as discussed in
Chapter 12: "Configuring QoS on the SSR" on page
discussed in
optional.
158
step 5
through
step 8
until you configure all the IGMP interfaces necessary for
159.
Chapter 13: "Configuring Security on the SSR" on page
Chapter 11: "Configuring the SSR for
179. You can also set up security as
207. Both tasks are
CoreWatch User's Manual
Advertisement
Table of Contents
